Doge-3A Enamel Painted Door | Antique Silver
Other doors:

Doge-3A Enamel Painted Door | Antique Silver

SKU # doge-3A-silver
Out of Stock
Features
Add tasteful Doge Interior Door to make the sophisticated traditional design.
The product is out of stock. Please check similar products - Single Doors
Product details

With decorative trim and expounds framing as key parts, The Doge Collection is one of our the richest outlines. Able to add tasteful and fresh air to your interior, search for the doors of this collection to be sure that Doge Interior Door is ideal for you. These pieces of art feature manufactured wood center for improved security with ecological changes. Different wood groups and various panel constructions can coordinate any home stylistic theme.

 


Door construction: manufactured sturdy pine, water-safe HDF-plate 0.47'', completing PU-covering

  • Old style finish with molding design in various options
  • Panel filled with polyethylene film, foam pads on the perimeter, corrugated box
  • The thickness of doors: 1.5”. Doors available in 80'' x 24'';28''; 32''; 36'' sizes
  • Simulation of stained glass filling or milling imitation
  • Satin Glaze - Milling Simulation is a transparent polymeric coating applied to the satin glass.

 

 

 

 

 

Pre-Hanging Service

If the product is suitable it will rise smoothly, without any gaps, but not so tight that it would be difficult to operate it - even a child should be able to open and close the door. It is easier to work with pre-deployed doors because they built into the doorway and a frame installed around the door, unlike the door of the plate. But, in any case, such a design must meet the requirements. Usually, a 1/2-inch distance is required on both sides for the gaskets between the jamb frame and the rough hole, so that it could be possible to adjust the door during operation. In order for the door installed correctly, contact the manufacturer.






Matching Jamb & Casing

To be suitable, the interior door should have the width of the finished wall or be marginally more profound than the wall. Two-by-four casing with one layer of 1/2 inch-thick drywall on each side is standard for the wall, for an aggregate thickness of around 4 1/2 inches. The profundity of a standard door box is 4 5/8'', which gives an additional 1/8'' to represent somewhat thicker walls because of stud estimate variety.

Elegant look with supplementary decorative elements as a rosette, a plinth, and a head molding. The head shaping is likewise made out of an assortment of trims and is constructed both of wood or MDF. Head forming serves just as design and can have an assortment of shapes and carvings.

 

 

 

 

 

 

 

 

 

 

The finish of the door, or what usually called a carpenter, is a flat part that closes the doorjamb and space between the divider and the doorjamb. To each door, we have a restrictive appearance of the frame, and we select them considering the way that the completed look would be in agreement with the inside outline. The width of the body of the door is 3 feet and is usually less than 1 9/16 inch. In most cases, it is 8 11/16"long, which corresponds to the length of general interior doors.

 


 





 


Extension Jamb Set

A more noteworthy number of contemporary houses have a specific thickness of dividers, while in more seasoned houses thicker dividers likewise tend to change the thickness from one end to the other. For those cases, there are entryways with an isolated joint, the profundity of which can be marginally controlled. Another alternative is to make an augmentation of the doorjambs: hold one side of the doorjamb and measure the separation important to bolt the support from the contrary side. Then use a table saw to cut them to the required width, and attach the strips to the edges of the doorjamb.

 



Matching Accessories

 

Completing brightening adornments, for example, a rosette, a plinth, and a head molding give the door an entire extravagant look. The cast head additionally incorporates an assortment of beautifying, completing components and is made of wood or MDF. The head part plays out an only enriching capacity and can be in varieties of shape and string.

 

 

 








Packing & Shipping

Delivery set: polyethylene film, foam pads on the perimeter, corrugated box molding package: set in a polyethylene film, corrugated cardboard


Product's SKU: doge-3A-silver
Additional Information
Design Carved, Framed
Size 36"x 80", 32"x 80", 28"x 80", 24"x 80"
Finish White
Style Traditional/Classic
Materials Manufactured Pine
Reviewed by 2 customer(s). Overall rating:
10.0 / 10


By
from Jersey City, NJ
10.0 Perfect. It doesn't get any better
I would recommend this company and these doors! I am sure you will get many compliments! Customer service team is acknowledgeable and friendly. They do their work fast and efficiently.
Was this review helpful? 3 / 0

By
10.0 Perfect. It doesn't get any better
Do love this company. All work was done fast and quoted prices were accurate. No additional costs.
Was this review helpful? 3 / 0