London Door | Toscana

The Renaissance collection represents the unique and elegant style. Impressed by antique Roman architecture these doors feature symmetrical and proportional lines to emphasize beautiful design.

Oak veneer covers door panel 

• Door panel construction: glued solid softwood, MDF
• Panel – MDF, wooden bead - alder
• Greening compositions with 4-layer PU coating systems

Pre-Hanging Service

If the product is suitable it will rise smoothly, without any gaps, but not so tight that it would be difficult to operate it - even a child should be able to open and close the door. It is easier to work with pre-deployed doors because they built into the doorway and a frame installed around the door, unlike the door of the plate. But, in any case, such a design must meet the requirements. Usually, a 1/2-inch distance is required on both sides for the gaskets between the jamb frame and the rough hole, so that it could be possible to adjust the door during operation. In order for the door installed correctly, contact the manufacturer.

Matching Jamb and Casing

To be suitable, the interior door should have the width of the finished wall or be marginally more profound than the wall. Two-by-four casing with one layer of 1/2 inch-thick drywall on each side is standard for the wall, for an aggregate thickness of around 4 1/2 inches. The profundity of a standard door box is 4 5/8'', which gives an additional 1/8'' to represent somewhat thicker walls because of stud estimate variety.

Elegant look with supplementary decorative elements as a rosette, a plinth, and a head molding. The head shaping is likewise made out of an assortment of trims and is constructed both of wood or MDF. Head forming serves just as design and can have an assortment of shapes and carvings.

Extension Jamb Set

A more noteworthy number of contemporary houses have a specific thickness of dividers, while in more seasoned houses thicker dividers likewise tend to change the thickness from one end to the other. For those cases, there are entryways with an isolated joint, the profundity of which can be marginally controlled. Another alternative is to make an augmentation of the doorjambs: hold one side of the doorjamb and measure the separation important to bolt the support from the contrary side. Then use a table saw to cut them to the required width, and attach the strips to the edges of the doorjamb.

Matching Accessories

Completing brightening adornments, for example, a rosette, a plinth, and a head molding give the door an entire extravagant look. The cast head additionally incorporates an assortment of beautifying, completing components and is made of wood or MDF. The head part plays out an only enriching capacity and can be in varieties of shape and string.

Packing & Shipping

Delivery set: polyethylene film, foam pads on the perimeter, corrugated box molding package: set in a polyethylene film, corrugated cardboard